Frequently Asked Questions

Wassenaar Inspecties offers inspection services for electrical installations and equipment, including NEN 1010, NEN 3140, SCIOS Scope 8, Scope 10, Scope 12, and NEN-IEC 62353 inspections. These services cover areas such as low-voltage systems, workplace safety, fire safety, solar panel installations, and medical electrical equipment, ensuring that electrical systems in residential and commercial buildings are safe, reliable, and compliant.

The services are offered to both residential and commercial customers. The knowledge base also mentions employers, employees, homeowners, business owners, tenants, landlords, healthcare providers, medical technicians, and managers of medical equipment as relevant audiences for specific inspections. Also hotels, shops, restaurants, childcare, schools, farmers, garages, vve.

Wassenaar Inspecties is active throughout the Netherlands. It offers inspection services to both residential and commercial customers in all places of the Netherlands

You can call Wassenaar Inspecties on (076) 303 63 90 during office hours, Monday to Friday from 9:00 AM to 5:00 PM. You can also email info@wassenaarinspecties.nl or use the contact form on the website.

Yes, Wassenaar Inspecties states that all of its inspectors are fully certified. The inspectors are described as experienced and trained to perform various types of electrical inspections according to high standards.

The inspector prepares a detailed report listing the identified defects and recommendations for improvement. You can then make the necessary adjustments and request a reinspection. Wassenaar Inspecties can also provide guidance or advice on the steps needed to implement the required changes.

The inspector prepares a detailed report listing the identified defects and recommendations for improvement. You can then make the necessary adjustments and request a reinspection, and Wassenaar Inspecties can also provide guidance on implementing the required changes. you can choose your own company to fix the adjustments

Make sure all electrical systems or equipment are accessible for inspection. You should also document previous inspections and maintenance work and ensure that electrical equipment is in good condition. I depends on the number of groepenkasten

Inspection costs vary depending on factors such as the size and complexity of the installation and the specific requirements of the inspection. Wassenaar Inspecties invites customers to contact them for a tailored quote.

Yes, Wassenaar Inspecties offers tailored quotes. You can request one through the website contact form or by calling (076) 303 63 90.

The contractor is required to maintain confidentiality toward third parties who are not involved in carrying out the assignment. Measurement and inspection data may be used for statistical or comparative purposes only if it cannot be traced back to the individual client.

A NEN 1010 inspection assesses electrical installations to ensure they meet legal and safety standards. It is focused on making sure electrical installations are safe, reliable, and compliant with applicable safety requirements.

The knowledge base states that NEN 1010 inspections generally take place for new or modified installations. The appropriate inspection frequency depends on the specific standard and type of installation.

Wassenaar Inspecties checks electrical systems through visual inspections, measurements of electrical parameters, and documentation checks. The goal is to confirm that the installation is in line with applicable standards.

Incorrect installation or maintenance of electrical systems can create safety risks, accidents, and property damage. The NEN 1010 inspection helps manage those risks and supports compliance with safety regulations. Is also required by insurance companies

A NEN 3140 inspection assesses the safety of electrical low-voltage installations and electrical equipment in buildings. Its purpose is to reduce workplace and safety risks by identifying and eliminating potential hazards. normally between 3-5 years

The knowledge base states that annual inspections are common for NEN 3140 inspections. The exact frequency depends on the specific standards and the type of installation. between 3-5 years

The inspection looks at the condition and functioning of electrical installations and equipment. This includes wiring, connections, protective mechanisms, and the compatibility of electrical components.

A NEN 3140 inspection helps identify risks and defects that could cause accidents. It contributes to employee safety and helps companies meet legal obligations and insurance conditions.

The NEN 3140 FAQ is aimed at employers, employees, tenants, and landlords. It is relevant for anyone responsible for or affected by the safety of electrical low-voltage installations and electrical equipment in buildings.

A Scope 8 inspection assesses the workplace safety of electrical installations and electrical equipment in buildings. Its goal is to minimize workplace risks by identifying and eliminating potential hazards.

A Scope 8 inspection helps identify risks and defects at an early stage before they cause accidents. It contributes to employee safety and supports compliance with the Dutch Working Conditions Act and insurance requirements.

The inspection reviews the condition and functioning of electrical installations and equipment. This includes wiring, connections, protective mechanisms, and compatibility between electrical components for safe workplace use. Every 3-5 years

The frequency can vary depending on the nature and use of the building. It may also depend on requirements from the Working Conditions Act and insurance companies. minimum once every 5 years

Employers and building managers may be responsible, depending on the agreements in place. Wassenaar Inspecties recommends making this clear in advance.

In many cases, a Scope 8 inspection is mandatory because of the Working Conditions Act or specific insurance conditions. Wassenaar Inspecties advises checking which rules apply to your situation.

The cost of a Scope 8 inspection can vary based on the size and complexity of the electrical installation. The location of the property can also affect the price.

A Scope 10 inspection assesses the fire safety of electrical installations and electrical equipment in buildings. Its purpose is to help prevent fires caused by electrical defects.

A Scope 10 inspection helps identify potential risks and defects that could cause fire. It contributes to building safety and protects people and property from damage caused by electrical fires.

The inspection reviews the condition and functioning of electrical installations and equipment. It includes checks of wiring, connections, protective mechanisms, and the compatibility of different electrical components. has to be done every 3-5 years

The frequency can vary depending on the nature and use of the building. It may also depend on specific requirements from insurance companies or government authorities.

The Scope 10 FAQ is written for homeowners, business owners, tenants, and landlords. It is relevant for people who want to assess and reduce fire risks related to electrical installations and equipment.

A Scope 12 inspection is a detailed technical inspection focused on solar panel installations. It assesses whether the installation meets current safety and quality standards.

A Scope 12 inspection helps ensure the safety and efficiency of solar panel installations. It can identify defects and potential hazards early and supports reliable, sustainable energy generation.

The inspection assesses electrical safety, mechanical mountings, the condition of the panels, and the overall performance of the system. It is focused on minimizing risks such as fire hazards and optimizing performance.

The recommended frequency can vary depending on factors such as the type and age of the solar panel installation. Wassenaar Inspecties can inspect the installation and advise based on the specific situation. every 5 years

A NEN-IEC 62353 inspection assesses the safety of medical electrical equipment. It is designed to ensure that medical electrical devices remain safe to use throughout their service life.

Medical electrical equipment must meet high safety and quality standards because defects can create serious risks for patients and healthcare providers. The inspection helps reduce risks such as electric shocks and other related hazards.

Wassenaar Inspecties carries out tests such as leakage current measurements, insulation resistance tests, and functional checks. It also provides detailed documentation of the inspections performed.

The standard focuses on periodic testing and inspection of medical electrical devices. It is also relevant for ensuring safe operation after maintenance or transport.

The NEN-IEC 62353 FAQ is aimed at healthcare providers, medical technicians, and managers of medical equipment. It is relevant for organizations that need to maintain the safety of medical electrical equipment.

Make sure all equipment is accessible for inspection. You should also document previous inspections and maintenance work and ensure that all electrical parts are in good condition.

A Scope 12 inspection is intended for owners or managers of solar panel installations. It is especially relevant when safety, quality, and performance of the installation need to be verified.

Yes, the knowledge base states that Wassenaar Inspecties provides detailed reports when defects are found. For NEN-IEC 62353 inspections, it also states that detailed documentation is provided for all inspections performed.

Yes, the inspections are described as supporting compliance with applicable standards, safety regulations, legal obligations, and insurance conditions. The exact requirements depend on the type of inspection and the customer's situation.

Wassenaar Inspecties lists locations in Breda, Amsterdam, Bergen op Zoom, Eindhoven, Leeuwarden, Den Haag, Enschede, Groningen, and Rotterdam. The contact page provides addresses and phone numbers for these locations.

Yes, Wassenaar Inspecties states that its team can advise on the right inspection frequency for your situation. This depends on the applicable standard, the type of installation, and the specific circumstances.

Yes, Wassenaar Inspecties offers training through its platform Wassenaar Opleidingen. The knowledge base mentions practical training in Breda in areas including NEN 3140, solar panels, and SCIOS Scope 8, 10, and 12.

Yes, the knowledge base states that Wassenaar Opleidingen is intended for people who want to train as an inspector or examiner. It also mentions training for businesses that want to improve employee knowledge in the field of safety.

The privacy statement lists the postal address and business address as Schapenweide 1, 4824 AN Breda. It also lists the telephone number as (076) 303 63 90.

Yes. The knowledge base states that companies are required to have electrical installations and work equipment inspected periodically so employees can work in a safe environment and the company complies with Dutch Working Conditions legislation.

The knowledge base mentions electrical work equipment such as tools as an example. It also refers to machines, workplace heating, and lighting as examples of how businesses rely on electrical installations.

The knowledge base mentions ladders, steps, and mobile scaffolding as climbing equipment that can pose risks to employees if it is not in good condition.

Yes, the knowledge base includes a vacancies page. It states that Wassenaar Inspecties is growing and invites people looking for a job as an inspector to keep an eye on the page.

Yes. The knowledge base states that many fire insurance policies require installations to be maintained and inspected regularly, and that insurers may refuse to pay if there has been no demonstrable periodic inspection of installations or work equipment.

The knowledge base states that employers and building managers can be responsible for arranging a NEN 3140 inspection, depending on the agreements in place. It advises making this clear in advance.

Wassenaar Inspecties refers visitors to its training platform at www.opleidingsinstelling.nl.

The contact page lists (085) 489 63 40 for the Amsterdam, Bergen op Zoom, Eindhoven, Leeuwarden, Den Haag, Enschede, Groningen, and Rotterdam branches. Breda is listed with a separate number: (076) 303 63 90.

Yes. The Werkwijze page states that Wassenaar Inspecties explains how it inspects business assets such as installations and tools, and what customers can expect.

Yes. The homepage refers to Kiwa certifications and qualified professionals, and it displays references to Kiwa-SCIOS-NL and InstallQ recognized installer materials.

The privacy statement lists gon.wassenaar@wassenaarinspecties.nl as an email address for Wassenaar Inspecties B.V.

The contact page lists branches in Breda, Amsterdam, Bergen op Zoom, Eindhoven, Leeuwarden, Den Haag, Enschede, Groningen, and Rotterdam. The listed addresses are: Schapenweide 1, 4824 AN Breda; Keizersgracht 482, 1017 EG Amsterdam; Zuidzuidehaven 39 A, 4611 HC Bergen op Zoom; Hurksestraat 64, 5652 AL Eindhoven; Lange Marktstraat 1, 8911 AD Leeuwarden; Platinaweg 25, 2544 EZ Den Haag; Wethouder Beversstraat 185, 7543 BK Enschede; Leonard Springerlaan 35, 9727 KB Groningen; and Corkstraat 46, 3074 AC Rotterdam.

The website mentions that Wassenaar Inspecties is looking for an inspector for SCIOS Scope 8, 10, and 12. It also states that people looking for a job as an inspector can keep an eye on the vacancies page.

In many cases, a NEN 3140 inspection is mandatory because of specific laws and regulations or insurance conditions. Wassenaar Inspecties advises checking which rules apply to your situation.

The knowledge base states that the practical training sessions are conducted on location in Breda.

The training platform offers practical courses on NEN 3140, solar panels, and SCIOS Scope 8, Scope 10, and Scope 12 inspections.

Yes. The page on inspecting business assets lists ladders, steps, and mobile scaffolding as equipment that Wassenaar Inspecties can inspect to help ensure workplace safety.

A NEN 3140 inspection checks the safety of low-voltage electrical installations and equipment against the technical requirements of the NEN 3140 standard. A SCIOS Scope 8 inspection is a periodic assessment focused on workplace safety under the Dutch Working Conditions Act and forms part of the SCIOS certification scheme. Both identify hazards, but Scope 8 specifically targets occupational safety compliance, whereas NEN 3140 addresses the broader technical safety of low-voltage systems.

A NEN 1010 inspection is typically carried out on new or modified electrical installations to verify that the installation meets current construction and safety standards. A NEN 3140 inspection is a periodic safety check of existing low-voltage installations and electrical equipment in use, focusing on workplace safety and ongoing legal compliance.

A Scope 10 inspection focuses on identifying and reducing fire hazards in electrical installations and equipment within buildings. A Scope 12 inspection, on the other hand, is a detailed technical assessment of solar panel installations that verifies their electrical safety, mechanical mounting, and overall performance. Thus, Scope 10 addresses general electrical fire safety, while Scope 12 is specific to photovoltaic systems.

A NEN 3140 inspection is a periodic safety check of low-voltage electrical installations and equipment aimed at minimizing workplace risks and meeting legal obligations under the NEN 3140 standard. A Scope 10 inspection specifically evaluates electrical installations for fire safety to meet insurer and regulatory requirements. In short, NEN 3140 targets general occupational electrical safety, whereas Scope 10 targets fire-risk reduction.

Yes. Wassenaar Inspecties performs initial inspections such as NEN 1010 for new or modified installations and periodic inspections like NEN 3140, SCIOS Scope 8, Scope 10, and Scope 12 for existing systems.

Yes. The Vacancies page notes that Wassenaar Inspecties is growing and regularly looks for inspectors; current openings are published on that page of the website.

Yes. The company specifically offers NEN 3140 inspections for electrical tools and other portable work equipment, ensuring they meet the highest safety standards before use in the workplace.

Wassenaar Inspecties focuses exclusively on carrying out inspections and providing independent advice; it does not perform repair or maintenance work.

Yes. Wassenaar Inspecties states that customers may ask for a Verklaring van Goed Gedrag (VOG) from both the inspector and the office staff as an additional security measure.

Wassenaar Inspecties focuses exclusively on inspections, works with experienced inspectors, and uses modern equipment and software. This efficiency helps minimise overall inspection costs for clients.

The homepage of Wassenaar Inspecties displays references to InstallQ-recognised installer materials, indicating that the company works in accordance with InstallQ recognition.

Yes. The homepage of Wassenaar Inspecties mentions Kiwa certifications, indicating that the company operates under Kiwa-approved inspection standards.

Wassenaar Inspecties states that its inspectors work with modern equipment and software to carry out inspections efficiently and in compliance with the latest requirements.

Wassenaar Opleidingen is Wassenaar Inspecties' own training platform that offers practical courses in Breda on topics such as NEN 3140, solar panels, and SCIOS Scope 8, 10, and 12 inspections. also the basis cursus elektrotechniek

A NEN-IEC 62353 inspection is aimed at verifying the electrical safety of medical devices through tests such as leakage-current and insulation measurements. A NEN 3140 inspection, by contrast, assesses the safety of low-voltage electrical installations and work equipment in buildings to reduce general workplace risks.

NEN-IEC 62353 focuses on ensuring that medical electrical equipment remains safe for patients and healthcare staff, while SCIOS Scope 12 evaluates the electrical and mechanical safety, mounting, and performance of solar panel installations. Each inspection targets a distinct type of installation and set of risks.

Telephone support is available from 9:00 AM to 5:00 PM. Please ensure your calls are placed within these hours for prompt assistance.

The exact duration depends on the complexity and size of the installation. In all cases, an inspection will take a minimum of 2 hours.

An inspection can usually be arranged within two weeks of your request. This ensures a prompt response to your inspection needs.

The inspection report will be delivered by email. Clients can expect to receive it within three weeks of the inspection date.

An inspection plan will be sent to the customer. This will be provided before the scheduled appointment.

Wassenaar Inspecties and its inspectors are SCIOS certified. They also hold accreditations from Kiwa and InstallQ.

Yes. After a successful inspection, the customer receives an official certificate, approval label, or inspection sticker confirming compliance.

Wassenaar Inspecties does not perform repair work. This ensures the company remains completely independent during inspections, advisory services, and any subsequent reinspections.

Invoices are issued with a two-week payment term. Payments must therefore be received within two weeks of the invoice date.

An inspection appointment can be cancelled or rescheduled free of charge when notice is given at least three days in advance. To qualify for this fee exemption, the company must receive your cancellation or rescheduling request no later than three days before the scheduled inspection.

All quoted inspection prices are exclusive of VAT. VAT is therefore not included in the listed amounts.

All inspections are conducted in accordance with the demands set by SCIOS. The procedures strictly follow the requirements prescribed by this inspection scheme.

The validity period can vary depending on specific requirements. However, an approved inspection report is considered valid for a minimum of three years for compliance or insurance purposes.

Yes. Wassenaar Inspecties provides recurring inspection contracts and offers a reminder service to ensure periodic inspections are conducted on schedule.

Yes, a temporary shutdown is required. Power, equipment, and business operations will be interrupted for approximately 10 minutes during the inspection.

Yes, urgent or emergency inspections are available. Clients can request this service as needed.

Yes. Inspections can be scheduled outside regular business hours upon request.

Wassenaar Inspecties has carried out NEN and SCIOS inspections for clients such as Gemeente Breda, Gemeente Amsterdam, Rechtbank Breda, Monkey Town, multiple Intratuin branches, Aartsen Fruit, and more than 100 garage companies, among others. This reference list illustrates the broad range of sectors that rely on the company’s inspection expertise.

A Scope 8 inspection focuses on workplace safety under the Dutch Working Conditions Act and aims to identify risks that could endanger employees. A Scope 10 inspection concentrates on fire-safety risks in electrical installations and is often required by insurers to reduce the chance of electrical fires.

Scope 8 deals with the general workplace safety of electrical installations and equipment, ensuring compliance with the Working Conditions Act. Scope 12 is a specialised technical inspection for solar-panel installations that evaluates electrical safety, mechanical mounting, and system performance.

Yes. The website explicitly states "Afspraak is afspraak", indicating that Wassenaar Inspecties commits to carrying out inspections on the date and time agreed with the customer.

A NEN 1010 inspection assesses new or modified electrical installations to verify compliance with construction and safety standards, while a SCIOS Scope 10 inspection focuses on identifying fire-safety risks in existing electrical installations, often to meet insurer requirements.

Wassenaar Inspecties advises customers to ask for a Certificate of Conduct (VOG) from both the inspector and office staff, check how long the company has been registered with the Chamber of Commerce, request references, and be cautious of unusually low prices because quality inspections are never "cheap."

A NEN 1010 inspection is usually carried out on new or modified electrical installations to verify that they meet construction and safety standards, whereas a SCIOS Scope 8 inspection is a periodic check that focuses on workplace safety under the Dutch Working Conditions Act for existing installations and equipment.

A NEN 3140 inspection is a periodic technical assessment of low-voltage installations and portable equipment to minimise electrical risks, while a SCIOS Scope 8 inspection is part of the SCIOS scheme and concentrates specifically on workplace safety compliance, identifying hazards that could endanger employees.

Wassenaar Inspecties also inspects portable electrical tools, ladders, steps, mobile scaffolding, solar-panel systems, and other work equipment. This wider asset coverage enables businesses to meet safety regulations and insurance requirements with one inspection partner.

The starting price for common inspections such as NEN 3140 or SCIOS Scope 10 is €500. This amount excludes any applicable travel costs.

Payment is accepted exclusively by bank transfer, to be completed after the inspection has taken place.

Wassenaar Opleidingen does not provide online or hybrid training options. All courses are offered exclusively on-site in Breda.

The company applies a single, standard price for all inspections. No additional pricing details are specified.

The maximum number of participants per training session at Wassenaar Opleidingen is 10. There can be no more than 10 attendees per session.

The official certificate, approval label, or inspection sticker is issued within one month of a successful inspection. This ensures customers receive their compliance documentation promptly after approval.

Yes. Special pricing is available for recurring inspections.

Yes, Wassenaar Inspecties can include thermal imaging (infrared) analyses as part of its electrical inspections.

Inspection reports and related documentation are currently available only in Dutch. We cannot provide them in English or other languages at this time.

After a request is submitted, a customized quote is typically prepared and delivered within one week. The team strives to maintain this turnaround to ensure prompt project planning.

Yes. Wassenaar Inspecties offers combined service packages that include both training courses and on-site inspections, providing clients with a comprehensive solution in a single arrangement.

Yes. Wassenaar Inspecties can conduct on-site inspections in languages other than Dutch, including English and German.

Inspectors adhere strictly to the health and safety protocols outlined in the SCIOS standards. These standards dictate all required personal protective equipment and onsite procedures for every inspection.

A reinspection can be scheduled promptly and completed within two weeks after all corrective actions have been taken. This timeframe ensures compliance is verified without unnecessary delay.

Yes, Wassenaar Inspecties inspects high-voltage electrical installations as well as low-voltage systems covered by NEN 3140 and related scopes.

Upon successful completion of the course, each participant receives a Scope Certificate. This document confirms that all course requirements have been met and serves as formal proof of qualification.

Yes. A secure client portal is available where customers can download their inspection reports and track upcoming inspection dates.

Wassenaar Inspecties retains inspection reports for five years.

Yes. Remote or virtual pre-inspections are available to estimate the project scope and associated costs before an on-site visit is scheduled.

Yes. Wassenaar Inspecties can supply examples of past inspections so you can review the structure and level of detail contained in its reports.

No. The company states that its services have no sustainability or environmental impact.

An additional fee of €200 applies when a customer requests an urgent or emergency inspection. This surcharge covers the expedited scheduling and service required for such requests.

In addition to its Kiwa and SCIOS accreditations, Wassenaar Inspecties holds a Certificate of Inclusivity. The company is also certified under a quality-management standard comparable to ISO 9001.

Yes. Wassenaar Inspecties conducts on-site Toolbox Meetings three times per year to keep client personnel informed about safety matters and new technical developments. Moreover, every new inspector is thoroughly briefed on all safety protocols before employment.

Clients do not need to undertake any special preparations or safety measures before a high-voltage installation inspection. They are asked only to keep clear of the work area so the inspector can work safely and without distraction. Please note that, as part of the standard procedure, power will be switched off for up to 10 minutes.